Latest Products
MAYAKO MYB0155 ALUMINIUM REAR SHOCK TOWER FOR UPPER ARMS FOR MX8
RM180.00
MAYAKO MYB0159 REAR UPPER ARM POSTS 2PCS FOR MX8
RM32.00
MAYAKO MYB0160 FRONT/REAR UPPER ARMS 4PCS FOR MX8
RM45.00
MAYAKO MYB0161 STEEL 43MM FRONT UPPER ARM TURNBUCKLE 2PCS FOR MX8
RM50.00
MAYAKO MYB0162 STEEL 48MM REAR UPPER ARM TURNBUCKLE 2PCS FOR MX8
RM50.00
MAYAKO MYB0164 OFFSET STEERING LINK BUSHING 4PCS FOR MX8
RM45.00
MAYAKO MYB0163F FRONT UPPER ARM HINGE PIN 2PCS FOR MX8
RM50.00
MAYAKO MYB0163R REAR UPPER ARM HINGE PIN 2PCS FOR MX8
RM50.00
TQ TOP QUALITY 062 COLOR WASHER FOR M3 TAPER SCREW 4PCS
RM8.00
Suitable for most ESC or Motor and make sure you measure it before you buy.
Power: 5V/0.18A:
Size: 30mm (L) * 30mm (W) * 10mm (H)Weight: 8.2g
RM12.00
EZRUN Series SensorLESS Brushless Motor
for 1/8 - 1/5
Model |
4274SL -2200KV |
PN | 30402500 |
Pole | 4 |
KV(No-load) | 2200 |
R. (Ω) | 0.0058 |
Current No-load(A) | 5 |
Max. Output Power(W) | 3000 |
C.at the point of M.O.P *(A) | 120 |
Motor D.&L(mm) | Φ=42, L=74 |
Shaft D.&L of the projecting part(mm) | Φ=5, L=18.5 |
LiPo(S) | 2-6 |
W (g) | 418g (14.745oz) |
Applicable | 1/8 Off-Road, Monster Truck |
RM320.00
THE BEST RTR UPGRADE
|
COMBO | ESC + 4278SD G2 |
P/n | 38010405 |
Pole | 4 |
KV(No-load) | 2250KV |
Current No-load (A) | 5.0A |
LiPo(S) | 3-6S Lipo |
Applicable | 1/8 Off-Road, truck, crawler |
Bottomline
- The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice, snow, and water accumulation.
- Built-in ultra-powerful switch mode BEC with a continuous current of 6A, an instant 15A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
- Equipped with the most advanced and safe electronic switches. The traditional mechanical switch protects and prevents dust, humid and other harsh environments, contact rust, and violent impact (such as flying slope landing) caused by the automatic closure of mechanical switches and other issues.
- Support the 32-degree turbo timing setting. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%, easily winning your rival. • Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, and current protection.
- Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
- Real-time data logging to view various running data on the HW LINK app using the OTA Bluetooth module.
- Support the firmware upgrade of the ESC (The multi-function LCD G2 program box or OTA Programmer is needed to purchase), you can enjoy the latest functions.
ESC Specifications
MAX 8 G2 (2022) | |
Scale Vehicles | 1/8th |
Cont./Peak Current |
160A / 1050A |
Motor Mode | Sensored and sensorless brushless motor |
Input | 3-6S Lipo |
Motor Limit | 4S Lipo: KV≤3000; 6S Lipo: KV≤2400 4278 size motor |
BEC Output | 6V / 7.4V / 8.4V adjustable, continuous current 10A (Switch-mode) |
Programming Port |
Share with Fab interface |
Switch Mode | Electronic Switch |
Capacitor protection |
Yes |
Waterproof | Yes |
Size (L.W.H) mm |
60(L)x48(W)x40.5(H)mm |
Weight (g) | 192g |
Input/Output | Input:XT90 Output:6.5mm gold plug(female) |
Motor Specification
Model |
4278SD |
PN | 30402800 |
Pole | 4 |
KV(No-load) | 2250KV |
R. (Ω) | 0.0048Ω |
Current No-load(A) | 5.0A |
Motor D.&L(mm) | 42mm / 78mm |
Shaft D.&L of the projecting part(mm) | 5mm / 18.5mm |
LiPo(S) | 3-6S Lipo |
W (g) | 455g (no wire) |
Applicable | 1/8 Off-Road, truck, crawler |
Best match with | MAX 8 G2 ESC |
RM1,090.00